| Customization: | Available |
|---|---|
| Aligning: | Non-Aligning Bearing, Non-Aligning Bearing |
| Separated: | Separated |
|
Still deciding? Get samples of US$ 0.1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
UCFL series with Pillow Block Bearing
Spherical bearing with seat is a bearing unit which combines rolling bearing with bearing seat. Most of the outer spherical bearings are made of spherical outer diameter, and are installed together with the bearing seat with a spherical inner hole, and the structure is diverse, and the versatility and interchangeability are good.
At the same time, This kind of bearing also has a certain aligning in design, is easy to install, has a dual-structure sealing device, and can work in harsh environments. Bearing seat is generally cast molding. Common seats are vertical seat (P), square seat (F), convex square seat (FS), convex round seat (FC), diamond seat (FL), ring seat (C), slider seat (T)
Outer Spherical Surface Bearing/Insert Bearing/Pillow Block Bearing/Bearing With Housing
1, With Automatic Adjustment Function
The outer diameter of the bearing and the inner diameter of the bearing seat are spherical matches, and there is an automatic aligning function between the two, which can compensate for the axis non-coincidence caused by the installation error and the deformation of the installation bottom surface.
2. Large Load Capacity
Because the internal structure of the outer spherical ball bearing is the same as that of the 6200 and 6300 series deep groove ball bearings, the outer spherical ball bearing with the FS seat can not only bear the radial load, but also bear a certain axial load. At the same time bearing working noise is small.
3, Long Service Life
Spherical ball bearings with seat are usually used in harsh working environments such as dirt, dust, humidity and high temperature, and the grease inside the bearing will deteriorate in the short term. Therefore, it is necessary to grease and re-lubricate the outer spherical ball bearings with seats at appropriate intervals, and replace the deteriorated grease with fresh grease. FS with cast iron outer spherical ball bearings are equipped with oil nozzles, which can be re-lubricated to ensure perfect performance and long service life in any working environment.
The grease can be used at normal temperature, low temperature and high temperature according to the different ambient temperature. The bearing outer ring is equipped with oil groove to better ensure that the grease can be smoothly injected into the bearing from the oil nozzle.
4, Good Sealing Performance
Both sides of the outer spherical ball bearing are equipped with heat-resistant, oil-proof rubber sealing ring and steel dust cover combination seal. The dust cover is assembled on the outer diameter of the bearing inner ring and rotates together with the inner ring, which can effectively prevent external foreign matter from entering the bearing inside and resist external pressure to protect the bearing. The combination seal composed of the sealing ring and the dust cover can prevent soil, dust and water from entering the bearing inside and prevent the grease inside the bearing from leaking. The bearing can maintain perfect working performance in harsh working environment.
5, Strong Bearing Seat
Bearing seat is a whole seat structure, bearing seat rigidity is very good, to prevent bearing deformation during assembly, bearing seat is durable under any working conditions. Bearing seat can be made of gray cast iron, ductile cast iron and cast steel and other materials.
6, The Bearing Can Be Easily Locked on The Shaft
There are four ways to lock the bearing on the shaft, the common method is to lock the extended end of the inner ring and other two setting screws, you can also use the locking sleeve, locking sleeve or eccentric sleeve locking. These four methods can easily lock the bearing to the shaft.
Linqing Chaokun Bearing Co., Ltd. is a research and development Production and sales in one physical factory,
The main products
• Deep groove ball bearings
• Aligning ball bearings
• Cylindrical roller bearings
• Self-aligning roller bearings
• Outer spherical bearings
• Angular contact bearings
• Thrust ball bearings
• Thrust roller bearings
Our advantage
1. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge.
2. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
3. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the
customer's requirements and needs.
4. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost.
3. It's better to start your order with Trade Assurance to get full protection for your samples order.
OEM policy
1. We can print your brand (logo, artwork) on the shield or laser engraving your brand on the shield.
2. We can customize your packaging according to your design
3. All copyright belongs to the customer, we promise not to disclose any information.
What is the minimum order
•Depending on the model, you can send me information for your calculati.
Are you a factory(manufacturer)
){kind=link}